2500L
E&I 2500L Power Amplifier 500 watts
The 2500L Amplifier is a rugged source of RF power, useful for ultrasonics, laser modulation, RFI/EMI, plasma equipment and general laboratory applications. The 2500L represents E&I's commitment to providing RF power amplifiers of the highest quality, durability and ruggedness.
Flexibility
The 2500L produces 500 Watts of class A linear power output over the entire frequency range from 50 KHz to 12 MHz. It has very low harmonic distortion along with low IMD products. Operation over the band is achieved without the need for any band switching or indeed any adjustments. The power gain is rated at 57 dB with a typical gain flatness of +/- 2 dB
The 2500L is compatible with most signal generators, frequency synthesizers, sweep generators and other laboratory signal sources. It accurately reproduces all waveforms within its power and frequency ranges: AM. FM, SSB, pulsed and other complex modulation schemes.
Ruggedness
The 2500L is built to withstand a 13 dBm input (1.0 Volt RMS) for any VSWR load condition. The internal switched mode power supply is very conservatively rated, in order to facilitate operation over a large range of line conditions and temperatures. The forced air cooling provides for low internal temperatures, providing long term reliability. The RF power is delivered by rugged DMoS FETs, de-rated to provide for excellent MTBF figures.
Class of Operation
Class AFrequency Range
50 KHz to 12 MHzRated Power Output
500 Watts (P1dB)Saturated Power Output
50 KHz to 12 MHz > 750 WGain
60dB (nominal)Gain Flatness
+/- 2.0 dBInput Power for rated Pout
0.5 mWInput Impedance / VSWR
50Ω / 1.5:1 maximumOutput Impedance / VSWR
50Ω / 1.25:1 maximumHarmonic Level
< -25dBcRuggedness
oo:1 VSWRStability
Unconditional into any passive load.Protection
Input: Unit will withstand input signal of+13 dBm without damage (1.0 V rms)
max. and infinite load VSWR.
